meishengchao
member
offline  |
| |
| posts: |
157 |
| joined: |
07/29/2015 |
| from: |
shanghai, DC
China |
|
|
 |
|
|
| Commissioning and acceptance of vacuum furnace |
VACUUM FURNACE
Mechanical, pneumatic, and electrical linkage debugging, adjust the workpiece transfer time ≤ 25S, the entire linkage should be coordinated, stable, accurate and reliable for three consecutive actions under the condition of loading 200Kg.
Mosi2 Heating Element Heat Treatment Furnace
Debugging of air-cooled fan, the speed is about 1400r/min, the rotation is flexible, and there is no abnormal phenomenon.The debugging of the alarm system should be accurate, safe and reliable.Measure insulation resistance greater than or equal to 20 kilohms.Measure the cold vacuum degree of the furnace, and the pressure rise rate is close to 0.5Pa/h (can be combined with the thermal debugging).
Sic Thermocouple Protection Tube Sintering
|
|
|
|
|
|
Email To Friend | 
Set Alert To This Topic
New Topic | 
Post Reply 
posted on: 01/10/2022 05:37:51 AM
Edit
Quote
Report
Profile
Reply