Subject: Construction home decoration flooring
Author: meishengchao
Posted on: 10/29/2015 12:46:05 AM
<p>Flooring: 1, a good amount of room area. 2, remove the grassroots level. 3. The selection of room lay mode (vertical or horizontal). 4, the construction of composite floor general construction site by the manufacturer.<br />
How to assemble wood floor<br />
The floor is an important part of home decoration, do not worry if construction team work, you can be yourself, "surgeon." This is not a joke, because the kind of fast-shop-style solid wood flooring is specially designed for those who like DIY, the only requirement is a serious intention, therefore, may not be doing yourself worse than the professional staff.<a href="http://exteriorfloor.com/">cheap patio flooring ideas</a><br />
Required materials: wood, Pit bar, bubble kapok income side, trimming strip basic tools: a utility knife, saw table, awl<br />
Precautions:<br />
1, the need to lay the ground plane level interior floor drop should not be too large, can not lay more water in wet areas.<br />
2, the entire floor area larger spread fast, the bottom should be slip proof EVA foam cotton, along the walls of the space application closing edge foam cotton tightened.<a href="http://outdoordeckingmaterial.com/">wood plastic composite outdoor decking material for sale</a><br />
DIY construction:<br />
1, if the space above the door bottom floor, you can start laying from the door; if the door bottom gap is small, naturally turned out to be empty prior range. The concave bar from entry starts paving.<br />
2, the block floor spread, directly into the female bar, use small wood and a hammer to knock tight.<br />
3, if the interface is too large piece of floor, use a utility knife in accordance with the size of the cut from the seams. Cutting floor also follows the existing bump slot, will cut into a suitable size piece of the floor mosaic.<br />
4, the gap between wall and floor, can be directly filled revenue side foam cotton, make it smooth.<br />
5. Finally, the four sides of the floor and walls of the contact edge of the modification is available, the laying work can be done.<br />
Maintenance tips:<br />
Wood surface cleaning to avoid static electricity, use a damp cloth to wipe dust, do not wipe with a damp cloth directly.<a href="http://compositewooddeck.com/">composite wood deck</a></p>
References:
